Electrical machines safety

Safety Measures while Working with Electrical Machines

Industrial Mechanical


When operating with electrical machines, operator or user for the first time should be careful to avoid accidents.

Based on the experience of many experts, some rules and regulations have been made for the handling of electrical appliances. In industry, an inquiry is normally ordered for the electrical accident. Items carrying electricity should be properly insulated. Aging of insulation withstand capacity and should not be allowed to leak current. Switching contacts and point contacts should be checked periodically for sparking and point heating.

Electrical machines safety

Important Preventive Measures to Avoid Electric Accidents:

  1. All metallic parts, externally accessible must always be earthed.
  2. No inflammable materials must be kept near electrical appliances, electric line wires or electric control panels.
  3. Electric safety devices like a fuse, circuit breakers over-tripping must always be used where ever required.
  4. All defective and worn-out electric fittings must be replaced timely.
  5. Untrained persons should not be allowed to repair electrical faults of a machine or device.
  6. Safety belts, helmet, rubber gloves, boots with rubber soles and other safety items must be used by electrician while repairing, dealing or working with high voltage. These appliances should be provided with all electric mechanics.
  7. Overloading of an electrical circuit must be avoided.
  8. The electrical appliances when not in use for a long time must be disconnected from the main supply.
  9. The main power supply should be switched off always during maintenance work. An only authorized person should be allowed to switch on and off the power supply.
  10. One should avoid touching metal case of any electrical apparatus when it is in operation.
  11.  The proper type of wiring should always be provided in all locations.
  12.  The electrical inspection should be done periodically to detect the damages.
  13. Always avoid overloading on any single point.
  14. Good standards of safety items must be maintained as per norms.

Even though while following the above preventive measures while working with electrical machines, a person might receive the electric shock due to some kind of negligence, the following steps must procedure must be done to save the life of a victim from the electric accident.

If a victim stops breathing after the electric shock, one should remove all sorts of obstructions from the mouth of the victim. Then he/she should sit on his knees near the head of the victim and keep your both hands on his near the collarbone, in such a way that the thumbs of both hands touch each other the fingers remain open. He/she should press the back of the patient slowly and release the pressure on the back and move up to the shoulders by sliding palms. Then the victim should be pulled upward by holding the patient’s arm in between his elbows and shoulders. This process is repeated until the patient starts breathing himself. By following the above steps victim’s life can be saved from electric accidents.

The post Safety Measures while Working with Electrical Machines appeared first on ME Mechanical.


Source link

Leave a Reply

Your email address will not be published. Required fields are marked *